RNGR-Stage4

400 watt stereo, front lower speaker, rear speaker, and subwoofer kit for select Polaris RANGER® modelsRNGR-STAGE4

The Stage 4 kit is the complete package that combines the Stage 3 kit with our rear speaker option. Adding our RM1 series mini speaker enclosure and clamp system, this kit adds the last bit of sound that you need. Simply plug in the harness, mount the speakers and rock out. Whether hitting the dunes or the trails, you are sure to be the center of attention of any get-together.

  • system includes digital marine receiver, four 6-1/2" speakers, a 4-channel amp, a 10" subwoofer, custom-fit enclosures, wiring, and hardware
Rockford Fosgate PMX-2 marine digital media receiver (does not play CDs)
  • built-in amplifier (20 watts RMS/50 peak x 4 channels)
  • works with Apple and Android smartphones
  • global AM/FM/Weather tuner
  • 2.7" color display
Rockford Fosgate RM1652B 2-way marine speakers
  • power handling up to 75 watts RMS (105 watts peak)
  • salt-, fog-, and UV-resistant Santoprene rubber surround
  • integrated 1" volcano dome tweeter
Rockford Fosgate RM1652W-MB 6-1/2" Prime roll bar speakers
  • loaded with marine-rated RM1652B marine speakers
  • 360° rotational mounting capability for unlimited flexibility
  • high density poly-ethylene enclosure with UV inhibitors
Rockford Fosgate RM110D2B 10" marine subwoofer
  • dual 2-ohm voice coils
  • power handling: 200 watts RMS (400 watts peak)
  • rugged, UV-stable injection-molded plastic construction
  • durable Santoprene rubber surround
Rockford Fosgate Power Series TM400X4ad 4-channel amplifier
  • 100 watts RMS x 4 at 4 ohms (400 watts peak)
  • 100 watts x 2 and 200 watts x 1 in 3-channel mode
  • variable low- and high-pass filters (50-250 Hz at 12 dB/octave)
  • conformal-coated circuit board and marine-grade stainless steel hardware

What's in the Box:

  • PMX-2:
  • Marine digital media receiver
  • Trim-ring
  • Mounting plate
  • Mounting bracket
  • Wiring harness
  • Backstrap
  • 4 Machine screws
  • 4 Hex-nuts
  • Installation/Operation booklet
  • RFRNGR-PMXDK:
  • Trim-panel
  • PMX-2 mounting bracket
  • PMX-0 mounting bracket
  • PMX-2 vehicle harness
  • PMX-0 vehicle harness
  • Power/ground harness
  • Back plate
  • Rubber grommet
  • 3 Wire-ties
  • 8 Screws
  • 4 Butt-connectors
  • Installation Instructions
  • RM1652B:
  • Two 2-way marine speakers (with fixed grilles)
  • Eight 1-1/4" Stainless steel Allen head screws
  • 3mm Allen head bit
  • 8 Speed clips
  • Installation/Operation manual
  • RFRNGR-FSE:
  • 2 Empty speaker pods
  • Two 45" speaker harnesses
  • 2 Bolts
  • 4 Screws
  • 4 Washers
  • 2 Nuts
  • Allen screwdriver
  • 2 Self-adhesive foam pads
  • 6 Wire-ties
  • Installation Instructions
  • TM400X4AD:
  • 4-Channel moto-marine amplifier
  • Power/ground/turn-on plug (installed)
  • Two 8" Speaker output harnesses (bare wire to 4-pin Molex)
  • Two 14" Input harnesses (2 RCA to 4-pin Molex)
  • Setup Disc (CD)
  • Amplifier Quick Setup
  • Certificate of Performance Verification
  • RM110D2B:
  • 10" Woofer
  • Grille
  • 8 Screws
  • Installation & Operation booklet
  • RFNGR-FWE:
  • Subwoofer enclosure
  • 11.5' Harness
  • 14" Red wire
  • Mounting bracket
  • 4 Strips of foam tape
  • 8 Wire-ties
  • 3 Cable-clamps
  • Installation & Operation booklet
  • RM1652W-MB:
  • 2 Wakeboard tower speakers
  • 2 Mounting couplers
  • Two 16" Speaker harnesses
  • 4 Plastic grommets
  • 4 Mounting bolts
  • 2 Security bolts (pre-installed)
  • 4 Nuts
  • 2 Safety lanyards
  • 2 Lanyard washers
  • Torx wrench
  • Installation & Operation Manual
  • RFRNGR-K8:
  • Wiring harness (inline 60A Maxi-fuse)
  • Mounting plate
  • 4 Screws
  • 9 Wire-ties
  • 3 Cable-clamps
  • Installation & Operation booklet
  • PM-CL3B:
  • Mounting clamps
  • 2 Self-adhesive logos
  • 2 Rubber inserts
  • 6 Wire-ties
  • RFRNGR-RSW16: Two 18' speaker cables
  • 4 Long wire-ties
  • 12 Short wire-ties
  • Installation Instructions
__ifPurchasable__
__endifPurchasable__