RNGR-Stage3

400 watt stereo, front lower speaker, and subwoofer kit for select RANGERĀ® modelsRNGR-STAGE3

Building on the Stage 2 kit, we add our amplifier mounting and installation kit, a TM400X4ad 400-watt Element Ready amplifier and under seat subwoofer enclosure. This complete system gets you rocking out in no time whether you're working the fields or running the trails with your friends.

  • system includes digital marine receiver, two 6-1/2" speakers, a 4-channel amp, and a 10" subwoofer
Rockford Fosgate PMX-2 marine digital media receiver (does not play CDs)
  • built-in amplifier (20 watts RMS/50 peak x 4 channels)
  • works with Apple and Android smartphones
  • global AM/FM/Weather tuner
  • 2.7" color display
Rockford Fosgate RM1652B 2-way marine speakers
  • power handling up to 75 watts RMS (105 watts peak)
  • salt-, fog-, and UV-resistant Santoprene rubber surround
  • integrated 1" volcano dome tweeter
Rockford Fosgate RM110D2B 10" marine subwoofer
  • dual 2-ohm voice coils
  • power handling: 200 watts RMS (400 watts peak)
  • rugged, UV-stable injection-molded plastic construction
  • durable Santoprene rubber surround
Rockford Fosgate Power Series TM400X4ad 4-channel amplifier
  • 100 watts RMS x 4 at 4 ohms (400 watts peak)
  • 100 watts x 2 and 200 watts x 1 in 3-channel mode
  • variable low- and high-pass filters (50-250 Hz at 12 dB/octave)
  • conformal-coated circuit board and marine-grade stainless steel hardware

What's in the Box:

  • PMX-2:
  • Marine digital media receiver
  • Trim-ring
  • Mounting plate
  • Mounting bracket
  • Wiring harness
  • Backstrap
  • 4 Machine screws
  • 4 Hex-nuts
  • Installation/Operation booklet
  • RFRNGR-PMXDK:
  • Trim-panel
  • PMX-2 mounting bracket
  • PMX-0 mounting bracket
  • PMX-2 vehicle harness
  • PMX-0 vehicle harness
  • Power/ground harness
  • Back plate
  • Rubber grommet
  • 3 Wire-ties
  • 8 Screws
  • 4 Butt-connectors
  • Installation Instructions
  • RM1652B:
  • Two 2-way marine speakers (with fixed grilles)
  • Eight 1-1/4" Stainless steel Allen head screws
  • 3mm Allen head bit
  • 8 Speed clips
  • Installation/Operation manual
  • RFRNGR-FSE:
  • 2 Empty speaker pods
  • Two 45" speaker harnesses
  • 2 Bolts
  • 4 Screws
  • 4 Washers
  • 2 Nuts
  • Allen screwdriver
  • 2 Self-adhesive foam pads
  • 6 Wire-ties
  • Installation Instructions
  • TM400X4AD:
  • 4-Channel moto-marine amplifier
  • Power/ground/turn-on plug (installed)
  • Two 8" Speaker output harnesses (bare wire to 4-pin Molex)
  • Two 14" Input harnesses (2 RCA to 4-pin Molex)
  • Setup Disc (CD)
  • Amplifier Quick Setup
  • Certificate of Performance Verification
  • RM110D2B:
  • 10" Woofer
  • Grille
  • 8 Screws
  • Installation & Operation booklet
  • RFNGR-FWE:
  • Subwoofer enclosure
  • 11.5' Harness
  • 14" Red wire
  • Mounting bracket
  • 4 Strips of foam tape
  • 8 Wire-ties
  • 3 Cable-clamps
  • Installation & Operation booklet
  • RFRNGR-K8:
  • Wiring harness (inline 60A Maxi-fuse)
  • Mounting plate
  • 4 Screws
  • 9 Wire-ties
  • 3 Cable-clamps
  • Installation & Operation booklet
__ifPurchasable__
__endifPurchasable__