RZR-Stage3

600 Watt stereo, front speaker and subwoofer kit for select Polaris® RZR® modelsRZR-STAGE3

Building on the Stage 2 kit, we swap out the non-amplified harness for our full amplifier mounting and installation kit. This literally amps up your sound with the addition of two Punch PBR series amplifiers as well as our under dash mounted front woofer enclosure and woofer combo. If you're ready for bass in your face while running the trails, then this is for you.

  • system includes digital marine receiver, two 6-3/4" speakers, a 4-channel amp, a 10" subwoofer, and a mono sub amp
Rockford Fosgate PMX-2 marine digital media receiver (does not play CDs)
  • built-in amplifier (20 watts RMS/50 peak x 4 channels)
  • works with Apple and Android smartphones
  • global AM/FM/Weather tuner
  • 2.7" color display
Rockford Fosgate RM1652B 2-way marine speakers
  • power handling up to 75 watts RMS (105 watts peak)
  • salt-, fog-, and UV-resistant Santoprene rubber surround
  • integrated 1" volcano dome tweeter
Rockford Fosgate RM110D2B 10" marine subwoofer
  • power handling: 200 watts RMS (400 watts peak)
  • rugged, UV-stable injection-molded plastic construction
  • durable Santoprene rubber surround
Rockford Fosgate PBR300X4 4-channel amp
  • 75 watts RMS x 4 at 4 ohms
  • selectable high- and low-pass filters (80 Hz, 12 dB/octave)
  • Dynamic Thermal Management cooling system
Rockford Fosgate Punch PBR300X1 mono subwoofer amplifier
  • 75 watts RMS x 1 at 4 ohms (150 watts RMS x 1 at 2 ohms)
  • variable low-pass filter (35-250 Hz, 12 dB/octave)
  • Dynamic Thermal Management cooling system

What's in the Box:

  • PMX-2:
  • Marine digital media receiver
  • Trim-ring
  • Mounting plate
  • Mounting bracket
  • Wiring harness
  • Backstrap
  • 4 Machine screws
  • 4 Hex-nuts
  • Installation/Operation booklet
  • RFRZ-PMX2DK:
  • Trim-panel
  • 2 Shoulder-head bolts
  • 4 Mounting screws
  • 2 Spring-clips
  • Power/ground harness
  • Hex-key
  • Installation Instructions
  • PBR300X4:
  • 4-Channel amplifier
  • Two 7" Speaker output harnesses (Molex plug on one end and tinned bare wire on the other)
  • Two 12" Input harness (Molex plug on one end and female stereo RCA jacks on the other)
  • Installation & Operation manual
  • Amplifier Performance Verification Certificate
  • PBR300X1:
  • Mono amplifier
  • 6" Speaker output harness (Molex plug on one end and tinned bare wire on the other)
  • 12" Input harness (Molex plug on one end and female stereo RCA jacks on the other)
  • Installation & Operation manual
  • Amplifier Performance Verification Certificate
  • RM1652:
  • Two 2-way marine speakers (with fixed grilles)
  • Eight 1-1/4" Stainless steel Allen head screws
  • 3mm Allen head bit
  • 8 Speed clips
  • Installation/Operation manual
  • RFRZ-FSE:
  • 2 Empty speaker pods
  • 2 Threaded studs
  • 4 Mounting screws
  • 2 Mounting bolts
  • 6 Washers
  • 2 Self-adhesive pads
  • Installation Instructions
  • RM110D2B:
  • 10" Woofer
  • Grille
  • 8 Screws
  • Installation Instructions
  • RFRZ-FWE:
  • Sub enclosure
  • 3 Brackets
  • 15" Wiring harness
  • 5 Large screws
  • 2 Medium screws
  • 2 Small screws
  • 2 Nuts
  • Installation Instructions
  • RFRZ-K4D:
  • 9' Power/ground/speaker harness (inline 100A fuse inside fuse-holder)
  • 38" Power/ground harness
  • Three 28" RCA harnesses
  • 64" Speaker harness
  • Amplifier mounting bracket
  • 8 Machine screws
  • 8 Washers
  • 4 Plastic grommets
  • 8 Wire-ties
  • 2 Self-adhesive foam pads
  • Installation Instructions
__ifPurchasable__
__endifPurchasable__